Silicone polishing cutter, light grey cone, 180 grit, average grit

Mid grit cone-shaped silicone cutter suitable for:

- polishing and shining natural and acrylic nails,

- grinding and giving shine to nails,

- polishing cuticles - also in the wet technique using olive oil or care butter,

- polishing bumps and impressions, smoothing the edges of cracks,

- final manicure and pedicure work.

The main use is grinding and polishing natural nails before applying and after removing hybrid varnish, as well as caring for the nail area. The cutter is ideal for polishing nails to a high gloss and for polishing cuticles. Used at the very end to obtain a smooth and shiny surface. After processing, the skin around the nail becomes soft and velvety. Used for rounding the edges of the nail and smoothing sensitive skin areas. Such cutters are also used in pedicure - to work on rough skin, smoothing the edges of cracks.

These cutters are not completely smooth, so you can achieve a perfect shine effect on the nail plate and eliminate its imperfections. They are unrivaled in this treatment: thanks to the softness of silicone, the nail is treated very gently, remaining healthy and intact.

The working part of the cutter is made of special silicone with corundum abrasive grain embedded in it, so the cutter retains its shape for a long time. Even if abrasive particles and silicone wear off during use, the tip becomes thinner but does not lose its properties.

Silicone cutters vary in hardness, shape and size. The color of the cutter indicates its degree of hardness:

▪️Soft(yellow, blue cutter) - used to polish and give natural nails shine and the skin a silky, soft and well-groomed look.

▪️Medium(pink, green, gray) - universal cutters for grinding surfaces, used for most types of finishes.

▪️Hard(black, brown) - will easily eliminate skin keratosis. Suitable for polishing the skin of the feet, including cracks on the heels, calluses; working with artificial nails (gel, acrylic). Experienced stylists combine different types of polishers in one treatment. Large-grained cutters are used to finish pedicure feet, grinding out unevenness, making the skin "silky", and fine-grained cutters - to obtain a lasting shine.

When using silicone cutters, remember to heat them up quickly! We recommend working with smooth, short circular movements and avoiding polishing at very high speeds. Recommended operating speed is 8000 - 12000 revolutions per minute.

A silicone cutter used with scented care oil is perfect for final wet polishing of cuticles.

Dimensions:

total length: 5,5 mm

shank length: 16 mm

shank width: 3 mm

shank diameter: 2.35 mm

color:brown

grit:180grit

Care of silicone cutters:

Silicone cutters can be sterilized according to general rules, i.e. in a thermal sterilizer or autoclave. Don't be afraid to damage them with high temperature, carbide silicone is a heat-resistant material suitable for such processing.

1. Immediately after work, place the silicone cutters in the disinfectant solution and leave for the required time.

2. Then rinse the cutters under cold running water.

3. After disinfection, place the cutters in an ultrasonic bath, where all impurities will be removed by cavitation.

4. Allow the cutters to dry completely, then pack them in a sterilization bag and place them in a dry air sterilizer/autoclave for the time specified in the equipment manual.

5. After processing, store the cutters in a hermetically sealed sterilization package until next use.

! It is essential to disinfect, clean and sterilize cutters after each use and each client.